A flexible disk drive is a storage device that reads and writes data on a removable, flexible magnetic disk enclosed in a protective jacket or shell, commonly called a floppy disk.
Registries list the flexible disk drive as a storage hardware class so that media formats and disk image formats can name the device they depend on.
Flexible disk drives were the default way to move software and documents between computers for roughly two decades, and their media still arrive in archives in boxes of personal papers and institutional records. Reading those disks today depends on knowing exactly which drive and which recording method produced them, which is why storage hardware appears in format registries alongside file formats.
Three sizes, many formats
IBM introduced the 8-inch flexible disk around 1971, first as a read-only medium for loading microcode. Shugart Associates brought out the 5.25-inch minifloppy in 1976, and Sony introduced the 3.5-inch disk in its hard shell in the early 1980s. Physical size, though, only narrows things down. Within each size, density (single, double, high, extended), the number of sides, and the encoding all vary.
| Disk | Typical PC capacity |
|---|---|
| 5.25-inch, double density | 360 KB |
| 5.25-inch, high density | 1.2 MB |
| 3.5-inch, double density | 720 KB |
| 3.5-inch, high density | 1.44 MB |
Those figures assume an IBM PC-compatible format using MFM encoding. Other systems did things differently. Apple’s 400K and 800K Macintosh disks used GCR encoding with variable drive speed, the Commodore 1541 used its own GCR scheme on 5.25-inch disks, and the Amiga wrote whole tracks at once in a layout PC controllers cannot read. Two physically identical 3.5-inch disks can therefore need entirely different equipment. Labels rarely help: a disk marked “backup 1994” says nothing about whether it was formatted on a PC, a Mac or a word-processing machine such as those sold by Wang or Brother, each with its own layout. The drive that wrote it is often the first fact to establish and the hardest to recover.
Drive, medium and image
Records that describe this material benefit from keeping three things apart.
The medium is the disk itself, with its size, density and write type. Floppies are rewritable, with a write-protect tab (a notch on 5.25-inch disks, a sliding window on 3.5-inch ones) that blocks writing without changing the medium’s type.
The drive is the hardware dependency: a 1.2 MB drive can read 360 KB disks, but writing them can leave tracks other 360 KB drives struggle with, and a high-density 3.5-inch PC drive cannot read an 800K Mac disk at all.
The disk image is the file format that captures the content: raw sector images (.img, .ima), system-specific formats such as .adf for Amiga or .d64 for Commodore, and flux-level formats written by KryoFlux, SuperCard Pro or Greaseweazle. A registry links image formats to the media they represent and the physical medium of the original.
Imaging practice
Write-blocking comes first: setting the tab to protect, or using a controller that cannot write. Many collections then capture at flux level, because a flux image keeps everything the read head saw, including copy-protection tracks and marginal sectors, and can be decoded again as software improves. A sector image can be derived from it.
Every image should get a fixity value at capture, for example a SHA-224 or SHA-256 digest, and a note of the hardware, software and settings used. Retries matter too: a sector that read only on the fifth attempt is evidence worth recording. Disks that have been stored badly often shed oxide, and the first pass may be the only good one, so dirty or moldy disks are usually cleaned before any read attempt. The identification side, recognizing which image format a file is, is covered in the file format identification guide; related hardware and media terms are in the vocabulary index.
Example in RDF
<storageMedium rdf:about="https://example.org/media/3.5-inch-hd-floppy">
<name>3.5-inch high-density flexible disk</name>
<formattedCapacity>1474560 bytes</formattedCapacity>
<requiresDrive rdf:resource="https://example.org/hardware/flexible-disk-drive-3.5-hd"/>
<writeType>Rewritable</writeType>
</storageMedium>
Questions about Flexible disk drive
Is a flexible disk the same as a floppy disk?
Yes. 'Flexible disk' is the formal term used in standards and technical documentation; 'floppy disk' is the everyday name. The rigid plastic shell of the 3.5-inch disk hides it, but the magnetic medium inside is still a flexible disk.
How much data does a floppy disk hold?
It depends on size and density. Common PC values are 360 KB for a 5.25-inch double-density disk, 1.2 MB for 5.25-inch high density, 720 KB for 3.5-inch double density and 1.44 MB for 3.5-inch high density.
Can a modern USB floppy drive read every 3.5-inch disk?
No. USB drives generally read only PC-formatted 720 KB and 1.44 MB disks. Apple 400K and 800K disks, Amiga disks and many other formats use encodings these drives cannot handle and need a controller such as Greaseweazle or KryoFlux.
What is a flux image?
A record of the magnetic transitions on the disk surface, captured before any decoding into sectors. Flux images preserve copy protection, unusual encodings and damaged areas, and can be decoded into sector images later with better software.
How do you know a floppy image was captured correctly?
Imaging tools report unreadable sectors and checksum errors per track. A sector image should also be hashed immediately after capture, so later fixity checks can show it has not changed since the disk was read.